Neo 2T Smart Bike Trainer

General
DIMENSION - 22.6" x 29.5" (575 x 750 mm)
WEIGHT - 47.4 lbs (21.5 kg)
HEIGHT - 21.7" (55 cm)

Connectivity
WIRELESS COMMUNICATION - ANT+ connectivity, BLUETOOTH wireless technology
CONTROL BY - Smartphone, tablet, ANT+ bike computers, stand alone, computer connection via ANT+ antenna
READ OUT ON - Smartphone, tablet, bike computer, computer with ANT+ antenna

Indoor Training Features
ELECTRICAL REQUIREMENT - 110-240 Volts
SUITABLE CASSETTES - Shimano/SRAM 9 to 11 speed compatible, Campagnolo (compatible, requires special cassette body), SRAM 12 speed/XDR (compatible, requires special cassette body), Shimano 12 speed Microspline compatible, requires special cassette body)
SUITABLE AXLES - Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm and 148 mm. Adapter for 135 x 10 mm available
GEAR RATIO - Chainring set-up: up to 3 sprockets, teeth per sprocket, adjustable between 22 and 53. Rear cassette: up to 12 sprockets, teeth per sprocket adjustable between 11 and 40
Q-FACTOR - 147 mm
MAX POWER - 2200 Watt
MAX INCLINE - 25%
SIMULATION OF DESCENT - Yes
MAX TORQUE - 88 Nm
MAX BRAKE FORCE - 260 N
FLYWHEEL - Virtual
MASS INERTIA - Variable to 275.6 lbs (125 kg)
CALIBRATION - No calibration needed
OUTPUT - Speed, cadence, power
ACCURACY - <1%
MEASURED SPEED - Yes
MEASURED CADENCE - Yes
MEASURED POWER - Yes

NEO 2T Smart Trainer
Front wheel support
Quick release for road bikes and mountain bikes (130mm/135mm x 5 mm)
SHIMANO/SRAM 9-11 cassette body
Thru axle end caps (142 x 12 mm and 148 x 12 mm)
1-month Tacx Premium software
1-month Zwift membership software trial

Cassette Speeds and Sizes:

Cassettes come in different speeds (7, 8, 9, 10, 11 and 12). The speeds is how many gears there are on the cassette.

Cassettes also come in different sizes (11-28T, 11-32T, 11-34T etc.). The first number refers to how many teeth are on the smallest gear, and the second number refers to how many teeth are on the largest gear.

Now that you know this, you can go ahead and check the speeds and size of the cassette on your bike.

Counting Speeds:

Count how many gears are on the back wheel of your bike. The number of gears there are is how many speeds your cassette is. 

In this example, the bike has 10 gears on the back wheel. This means it is a 10 speed cassette.

Checking the Size:

Count how many teeth are on the smallest and largest gear. Removing the wheel from the bike can make this a little easier.

In this example, the cassette has 11 teeth on the smallest gear and 32 on the largest, making the size 11-32T.

Now that you know how many speeds and what size cassette you need, you can head over to our cassette section and purchase the appropriate cassette to go with your trainer!

Frequently Asked Questions:

Q: Do the speeds and size of the cassette really matter?

A: Yes! It matters a lot! When getting a cassette for you trainer you should match it exactly to what is already on your bike. If that's not possible, then going one size smaller in cassette is fine as long as the speeds are still the same. The speeds HAVE to match or your gears will not work!

Q: We plan on using two bikes back and forth on one trainer but each bike has a different number of speeds. Will one cassette work for both bikes?

A: No, there is no one cassette that will work for bikes of different speeds. In this case, you will need to get two cassettes and swap them on the trainer every time you swap the bikes.

This item is eligible for shipping. Shipping will be calculated at checkout.

Please visit our Shipping Policy page for more information.